Author Topic: Hood pins  (Read 522 times)

68krrrr

  • Sr. Member
  • ****
  • Posts: 464
  • SoCal Upland
    • View Profile
Hood pins
« on: September 17, 2022, 02:41:20 PM »
I know i saw this somewhere but i searched with no luck ,what is the placement of the 3 rivets on the hood pins is 3 ,6 & 9 0'clock ? i currently have 4 screws  in mine at 1,5,7 & 11 o'clock & picked up the concours ones from Branda & want to change then out .
« Last Edit: September 17, 2022, 03:19:26 PM by 68krrrr »
Current
1967 GT500 #1724
Nightmist Blue /Parchment
Porsche 911 Turbo 2007 Highly modified
1934 Ford Chopped & channeled

Previously owned
1968 GT500KR #03528 Lime green
1968 GT/CS

"Fly low & avoid the radar"
Thanks Adam

greekz

  • SAAC Member
  • Hero Member
  • *
  • Posts: 581
    • View Profile
Re: Hood pins
« Reply #1 on: September 17, 2022, 03:15:43 PM »
Mine (2339) has four rivets; 12, 3, 6, and 9 with the pins angled inward between 9 and 12, 12and 3.
SFM 6S1134  '67 GT-350 #2339

68krrrr

  • Sr. Member
  • ****
  • Posts: 464
  • SoCal Upland
    • View Profile
Re: Hood pins
« Reply #2 on: September 17, 2022, 03:20:45 PM »
Thanks i knew i was confused on this & knew my screws where in the wring locations
Current
1967 GT500 #1724
Nightmist Blue /Parchment
Porsche 911 Turbo 2007 Highly modified
1934 Ford Chopped & channeled

Previously owned
1968 GT500KR #03528 Lime green
1968 GT/CS

"Fly low & avoid the radar"
Thanks Adam

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Posts: 7399
  • Original Posts:14706
    • View Profile
Re: Hood pins
« Reply #3 on: September 17, 2022, 03:23:04 PM »
Mine (2339) has four rivets; 12, 3, 6, and 9 with the pins angled inward between 9 and 12, 12and 3.
Yes yours are correct and are the typical 67 Shelby configuration 12,3,6,9  regardless of if early or late production.   
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby