Author Topic: 4 speed console question  (Read 772 times)

azdriver

  • Sr. Member
  • ****
    • View Profile
4 speed console question
« on: May 09, 2023, 10:13:48 AM »
So my console is from an auto car..(long story). Hoping someone had a 4 speed console maybe out of the car they could take some measurements from. Shifter hole size and relationship to edges would be helpful.

Thanks, Pat

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: 4 speed console question
« Reply #1 on: May 09, 2023, 11:10:41 AM »
Yes I can do it later today

eragtforty

  • Jr. Member
  • **
    • View Profile
Re: 4 speed console question
« Reply #2 on: May 09, 2023, 01:25:33 PM »
I have a new Branda 4 speed console out of car that you can get some measurements from if you like.  I live in Peoria AZ also (Lake Pleasant & Happy Valley).  Just send me a PM and let me know if interested.   Jerry

azdriver

  • Sr. Member
  • ****
    • View Profile
Re: 4 speed console question
« Reply #3 on: May 09, 2023, 01:50:59 PM »
Thanks guys…

Pat

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: 4 speed console question
« Reply #4 on: May 09, 2023, 05:30:14 PM »
I measured the 4spd hole at 3 3/8 inches wide and 3 1/8 tall

The upper left corner is the same place as the automatic hole

azdriver

  • Sr. Member
  • ****
    • View Profile
Re: 4 speed console question
« Reply #5 on: May 09, 2023, 06:50:51 PM »
 8) Thanks

Pat