News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Holley 715 Help

Started by s2ms, September 01, 2023, 05:07:02 PM

Previous topic - Next topic

s2ms

The 3259 on my 66 started running rich in about the last 500-1000 miles or so. I pulled the carb and the secondary throttle plate bottoms and lower bores are covered in black, mostly dry soot on the plates. Primary plates and bores are clean and look great. I don't see anything obvious...float levels are good, no sticking or leaking floats, needles/seats look good, etc. The plugs are more fouled towards the front of the engine.

Could this be something as simple as a clogged air bleed? Any other ideas?

Thanks,
Dave
Dave - 6S1757

tomhawk

Would check pcv valve.   Run the engine in a dark garage with the hood up to check for plug wire arch. By your desc. the carb is okay. Could be vac. leak from carb gasket, or intake to head gaskets. Just some thoughts

Drew Pojedinec

Check timing and ignition as mentioned.
Fuel leakage is possible, but anything that causes bad combustion can make soot like that

67350#1242

Possible power valve leaking?
67 GT350  SJ 02/01/67  Gray 4spd A/C
67 Coupe  SJ 11/16/66  White Auto A/C PDB