Author Topic: Driveshaft markings  (Read 2989 times)

cob4ra

  • Full Member
  • ***
    • View Profile
Driveshaft markings
« on: June 27, 2019, 02:36:52 PM »
Curious what anyone knows about the third lowest line color would be? I did find and reapplied my stencil numbers in yellow!?
« Last Edit: June 27, 2019, 02:40:30 PM by cob4ra »
1966 Shelby GT350 Hertz 1680 ( previously 6s1842;6s1818)                                                  2000 Saleen S281 Speedster.                              Previously two sunbeam tigers and have owned 24 mustangs ; 4 Mercury Cyclones and one 1960 Fiat 600!

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Driveshaft markings
« Reply #1 on: June 27, 2019, 03:25:31 PM »
What kind of yellow paint did you use?  I have a stencil and would like to know what kind of paint to use.

Thanks again,

Steve
SFM 6S406

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Driveshaft markings
« Reply #2 on: June 27, 2019, 04:28:37 PM »
Is this a manual or automatic driveline and from what production period ?

Interesting to see that your car received a driveline with the stencil tube number on it. Most didn't

If there is any remains of the original color anf you can't make it out for sure or just want confirmation a little daub of lye (oven cleaner works) will cause the paint to lift and bubble exposing a watered down but visible color of you to see. Happens quickly and once done paint is gone. Just one technique that others have had success with
« Last Edit: June 27, 2019, 04:30:31 PM by J_Speegle »
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

march66

  • Newbie
  • *
    • View Profile
Re: Driveshaft markings
« Reply #3 on: June 27, 2019, 07:23:57 PM »
Here are photos of my driveshaft laying on the tailgate of my F150. It is original to my 66 Shelby with 4 speed.

The painted stripes are dark green, dark blue and a light blue. I submerged the driveshaft in Evapo-rust and matched the revealed painted areas as best I could. Used Testors paint and applied the stripes with a brush. Since I could not find any school bus yellow paint, I spray painted the stenciled marking Rust-oleum golden sunset. Also used liquid gun blue to replicate a welded look on parts of the shaft. All inspired by a J Speegle article on restoring driveshafts.

IMG_6632.JPG


FullSizeRender.jpg

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Driveshaft markings
« Reply #4 on: June 27, 2019, 07:33:19 PM »
Can you please direct me to Mr. Speegle's driveshaft article or post it?

Thanks,

Steve
SFM 6S406

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Driveshaft markings
« Reply #5 on: June 27, 2019, 07:35:27 PM »
Can you please direct me to Mr. Speegle's driveshaft article or post it?

If your a member over on the ConcoursMustang site it's in the Library section (has subsections for all the different years and Shelby's but is in each one of the subsections)
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

march66

  • Newbie
  • *
    • View Profile
Re: Driveshaft markings
« Reply #6 on: June 27, 2019, 07:38:16 PM »
Hopefully these photos post!

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Driveshaft markings
« Reply #7 on: June 27, 2019, 07:57:42 PM »
Hopefully these photos post!

Need to mention but its not normal but did happen that a worker at the driveline supplier to reverse the order of the marking stripes.

For those that just copy what they see on other's peoples cars' ;)

Glad the DYI article was helpful for you and many others
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

cob4ra

  • Full Member
  • ***
    • View Profile
Re: Driveshaft markings
« Reply #8 on: June 27, 2019, 09:57:32 PM »
King chief I used “ sunlit yellow by Krylon; And it seem to match the original yellow I found on my driveshaft very well ; I had to make sure the stencil is tight and spray lightly
1966 Shelby GT350 Hertz 1680 ( previously 6s1842;6s1818)                                                  2000 Saleen S281 Speedster.                              Previously two sunbeam tigers and have owned 24 mustangs ; 4 Mercury Cyclones and one 1960 Fiat 600!

cob4ra

  • Full Member
  • ***
    • View Profile
Re: Driveshaft markings
« Reply #9 on: June 27, 2019, 10:00:41 PM »
Jeff always thanks! Mine was built April 8th through 18th 1966 and a hertz auto trans ! And funny how I accidentally found my stencil by light steel wooling and the “ Mona Lisa” appears!!!! ( Shelby American installed the radio 4/8/66( line 11) 1680
« Last Edit: June 27, 2019, 10:30:32 PM by cob4ra »
1966 Shelby GT350 Hertz 1680 ( previously 6s1842;6s1818)                                                  2000 Saleen S281 Speedster.                              Previously two sunbeam tigers and have owned 24 mustangs ; 4 Mercury Cyclones and one 1960 Fiat 600!

cob4ra

  • Full Member
  • ***
    • View Profile
Re: Driveshaft markings
« Reply #10 on: June 27, 2019, 11:19:39 PM »
My wonderful wife has eyes that see colors better than a mans eye ! She is seeing Lavender “ !!
1966 Shelby GT350 Hertz 1680 ( previously 6s1842;6s1818)                                                  2000 Saleen S281 Speedster.                              Previously two sunbeam tigers and have owned 24 mustangs ; 4 Mercury Cyclones and one 1960 Fiat 600!

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Driveshaft markings
« Reply #11 on: June 28, 2019, 08:12:19 AM »
If your a member over on the ConcoursMustang site it's in the Library section (has subsections for all the different years and Shelby's but is in each one of the subsections)

Thank you Mr. Speegle.  I am indeed a member and shall check there.  Thanks again.

Steve
SFM 6S406

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Driveshaft markings
« Reply #12 on: June 28, 2019, 08:16:21 AM »
And thank you also Cob4ra for the recommendation of the Krylon color.  A nice weekend task!!!

Thanks again,

Steve
SFM 6S406

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Driveshaft markings
« Reply #13 on: June 28, 2019, 01:27:16 PM »
My wonderful wife has eyes that see colors better than a mans eye ! She is seeing Lavender “ !!

Standard warning. Pictures taken with digital cameras posted and viewed on out monitors and phones are often different to very different to what they look like up close and personal. One of the reasons I cut a section of floor (just an extreme example) of a floor to retain the original color for later used when I can rather than rely on just pictures.   Sometimes picture and recall of how close it was is all I get
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

cob4ra

  • Full Member
  • ***
    • View Profile
Re: Driveshaft markings
« Reply #14 on: June 28, 2019, 03:02:35 PM »
But Jeff! Was lavender correct for my Shelby?? It would make my wife happy?? She’s beautiful and Irish and usually gets her way? So now it’s in your hands most awesome expert”! 😂 ( we need a little more humor on our site)
1966 Shelby GT350 Hertz 1680 ( previously 6s1842;6s1818)                                                  2000 Saleen S281 Speedster.                              Previously two sunbeam tigers and have owned 24 mustangs ; 4 Mercury Cyclones and one 1960 Fiat 600!